Coupe for sale

1965 Ford Mustang GT

$23,500

Geismar, Louisiana

I'm selling my 1965 Mustang Restomod. Originally a California car, I have the original black plates. Car has a 302L engine from a 1992 Mustang with a Demon 750 carb purchased in 2006. A new AOD 4-speed transmission was installed in 2006. Rotors, breaks, and wheels were all upgraded with aftermarket parts in 2007. Interior has racing seats installed. Fuel tank was pulled and cleaned in 2021 and new pump and sending unit installed. Carb was pulled, cleaned, and rebuilt at the same time. Interior is 90%. I installed new speakers and radio last year. I also removed the upper dash which was cracked but have not replaced it. I purchased the car in 2012 and it has been the best "doughnut car" for me and my kids to ride in on the weekends. As the kids get older, I have less and less time and ended up not driving the car as much. I'm ready to pass it on to someone else to play with, tinker, and enjoy it.

Trim GT

2010 Mustang GT-500 Super Snake Super Snake

$99,000

Cudjoe Key, Florida

Car has Drag Radials on Rear of the car with 6 Piston Brakes Front & Rear I have upgraded the car with CUSTOM MADE POWER RECARO DRIVER SEAT (passanger seat is also a Recaro but not power). The car also has a full glass roof and comes with a top of the line car cover embossed with the word SHELBY and matches the color combo of the car (see picture) I had a faster engine built and a 9" Moser Rear End for the car when it had 4,478 miles on the odometer that is 1000hp (1300HP on E-85) at a cost of around $30,000. HERE IS WHAT WAS DONE: * New block Assembled, Balanced & Blueprinted by Lidio Iacobelli at Alternative Auto Performance in Chesterfield Michigan * Forged Diamond Custom Pistions * Carillo H Rods 280,000 PSI Bolts * Cobra Jet Forged Crank Shaft * APR Pro Series Cylinder Head Stud Kit * Livernois Motor Sports Stage 3 Race Heads * Livernois Motor Sports Custom Ground Cams * Livernois Motor Sports Forged Oil Pump Gears * Roy Cole Racing Assembled the upper motor & degreed cams * Alternative Auto Performance Modified Lower intake for larger Kenny Bell Intercooler * Kenny Bell Intercooler * 100# Fuel Injectors * Shelby High Performance Fuel Rails * McLeod RXT Twin Disc Clutch * Custom Carbon Fiber Drive Shaft * Moser M9 - 9" Rear End Aluminum Center * 3.50 Gears - 35 Spline Moser Axle shafts * Fore Fuel System two stage pumps * Chrome Moly Front Frame Tubular * Larger fuel line to run 93 Premium or Re-tune for E85 On 93 Premium puts out 1000 HP On E-85 puts out over 1300 HP IF YOU ARE INTERESTED IN PURCHASING THE ORIGINAL ENGINE FROM THE CAR FOR $8,500 IT HAS 4,478 MILES ON IT. IT DOES NOT COME WITH A SUPERCHARGER AS IT WAS USED ON THIS CAR. THE CAR DYNO WAS 732.07

Trim Super Snake

1972 plymouth duster

$28,000

North Chili, New York

complete rotisserie resto everything all new pro built 360 engine Keith black .030 over. Pistons purple cam shaft performance valvetrain hi rise air gap manifold with 650 cfm carb electronic ignition. With orange box 833 4 speed with od 8.75 pois with 3.73 gear power disc brake conversion

1990 Corvette ZR1 1990 Corvette ZR1

$34,500

Ramona, California

1990 ZR1 Corvette My Father purchased this car brand new in May of 1990. We have all the original paper work and all the items that came with the sale of the car. There is only 4733 Original miles. Always garaged. Two Tops. My father passed away and I want to bless someone with his pride and joy. Serious Buyers/inquiries only. Call if interested. Will not reply to text messages or international buyers. Buyer will need to provide proof of all cash prior to viewing car. Great collectors car. My father had to pay over sticker price back in 1990 for the large demand of this car. Referred to as King of the Hill....Google the ZR1 Corvette or King of the Hill to get an understanding and history of how unique this car is to a Corvette lover. No scammers or tire kickers please. Buyer will need to purchase the car with cash. Price is firm. $34,500 Located in San Diego County

2014 Mercedes-Benz AMG C-63 507

$58,000

Duluth, Georgia

Dream car!!! Please Contact me if you are interested in this car.

2006 Ford Mustang Shelby GT-Hertz

$40,000

Vero Beach, Florida

40th Anniversary Special Edition, # 254 of 500 made. All original documentation and FOMO parts from Shelby changes. In like new condition.

1987 Bugatti Type 57s

$14,900

Rock Hill, South Carolina

BORED WITH FORD? Build a Bugatti.1937 Type 57s “Nasty” hardtop coupe glass body kit for $14,900 with either traditional Bugatti fenders or Figoni & Falaschi elegant “pontoon” coachbuilt style fenders (add $700). Designed for roll up windows. Three other Type 57s body styles available. Also for sale my fiberglass molds for four Bugatti bodies and Chip Foose designed Boattail Speedster DelahayeUSA.com Terry Cook 201 400 5528

1937 Bugatti Pacific fastback none

$14,900

Chester Twp, New Jersey

BORED WITH FORD? Build a Bugatti.1937 Type 57s Pacific fastback glass body kit for $14,900 with either traditional Bugatti fenders or Figoni & Falaschi elegant “pontoon” coachbuilt style fenders (add $700). Designed for roll up windows. Three other Type 57s Bugatti body styles available. Also for sale fiberglass molds for Bugatti plus Chip Foose designed Boattail Speedster. DelahayeUSA.com 201 400 5528.

Trim None

1937 Bugatti replica Type 57s

$25,000

Chester Twp, New Jersey

SWOOP COUPE: Glass Delahaye USA fastback 1937 Bugatti body withy 1936 Figoni & Falaschi enclosed pontoon fenders. Your choice of 3 front ends, Bugatti, Talbot Lago or Delahaye. Sitting on rolling chassis with Art Morrison frame rails. An unfinished project. Details and pix at delahayeusa.com. Also Bugatti and Boattail Speedster molds for sale cheap.

1966 Chevrolet Sport coupe

$25,000

Hanover, Massachusetts

Original matching numbers 327 turbo fire Original interior 2 sets of rims and tires Runs and drives like new

1965 ford mustang

$16,500

Martinsburg, West Virginia

1965 Mustang - Ready for Bodywork and Paint. All New Parts Include: Qtrs, Doors, Fenders, Hood, Upper & Lower Ctl Arms, Bushings, Shocks, Seat Covers, Door Panels, Dash Pads (2), Weather stripping, Carpet, Headliner, Wheels (American Racing), Tires (BF Goodrich), Brakes, Rotors, Drums, Calipers (SSBC), Seal Plates, Seat Cushions, 302 Crate Engine - Approx. 375HP, Many More..... Tons of used parts a well: Bumpers, Fenders, Doors, Hood.... MUST SEE!!!

1965 Ford Mustang

$15,000

Green Bay, Wisconsin

Very Nice mustang, almost done and ready to hit the road. Just needs the interior work finished. Dark Highland metallic green.

1981 Buick Regal Limited

$6,000

Dripping Springs, Texas

My wife bought this car in 1984. It was parked in our garage for 21 years until we moved and then parked under a carport for 18 years after that. The car originally came from Arizona. I have done almost all the maintenance work on this car myself. I drive this car to work once a week, 90 miles round-trip. This is a perfect car for classic car collectors. This is what does not work on the car: Speedometer Odometer, I keep a record of miles driven every time I drive it, it is an approximation Fuel gauge Clock on dash Trunk lift piston supports Windshield washer Passenger side window goes up and down only 4 inches Dashboard instrument/ lights one is intermittent A/C works but needs Freon/ I do not use the A/C because it puts too much of a strain on the engine What is included: Seven cans of R-12 refrigerant and charging hose Three smog pumps that can be rebuilt Rear bumper filler Hanes Buick regal manual All receipts and maintenance log since 1994

Trim Limited

1929 Mercedes-Benz gazelle

$2,000

Granville, Ohio

Mercedes Gazelle kit car, Ford Mustang chassis, with Ford engine. I have all the paperwork from the purchase. This car was given to me and I do not have the time for this project. Must go. Make an offer.

1981 Chevrolet Camero

$4,500

Jasper, Texas

For Sale 1981 Camaro Race car $4,500 obo This is a FAST 1981 Dirt track race car less motor, carburetor and distributer. This is a professionally built frame for dirt track racing on an 1981 Camaro ( $4,500). It is very fast and was a front running car at Cleveland and Edna, Tx. 3 wheel disc brakes as the right front has a blank HD hub and adjustable brake bias valve. Stock lower control arms. Replacement rebuildable ball joints. After market front end parts including spindles, hiem rod ends all around, HD connecting links, tie rods and connecting link ($2,800 in parts). All HD front end parts are from Day Automotive. The upper control arms are tubular replacements with the correct length for circle tack cornering (short on the right side, long on the left side). The front end was computer setup and printout available. Adjustable weight jaks up front. The rear end is a 9in Ford full floater with 6.00 gears, full spool, aftermarket 31 spine axles and light weight rear disc brakes. 5in bolt circle with 5/8 studs on all axles. 20 gal fuel cell, custom wiring system, Kirkley racing seat, 2 quick disconnect steering wheels, racing power steering and Z28 quick steering box and 2.0/1 steering multiplier. New seat belts for 2021. Straight frame and very sturdy roll cage, aluminum side panels. Fiberglass roof and Hood. New battery in 2021. Brinn 2 speed racing transmission with new clutch pack 2021 season. Steel bell housing and mini high torque starter. Hydraulic clutch. For extra cost I have a rebuilt non-sealed 602 available for $2,8oo. (The engine is a 358 ci 10 /1 compression externally balanced rotating assembly, non-sealed 602, original hydraulic lifter camshaft). Car comes with a double pass radiator, new MSD-6AL ignition. Very reliable and powerful ignition system. Installed new QA-1 rebuildable shocks properly valved for each wheel in 2021. We raced this car once last year at Cleveland, Tx in street stock class to break-in the engine. This car has lots of track time left in it. The wheels are 15 x 8 x 5in bc with H500 tires. There are over $15,000 in parts in this car. Included with the car are 5 extra tires and wheels, extra bad lock, extra wheels, axle spacers, 2 tie rods, shackle, steel bushings for control arms, extra lower control arms over ($2,200) in costs. All tires have good tread. I also have a complete new Performance Bodies slab body that fit this car ($1,500) that can be purchased separately for $750. This car needs a younger driver and hit the track with an engine that meets your local rules. I suggest you buy this-car less motor & transmission. The engine is not sealed! The engine rules for this class in Cleveland Tx are open motors so this car is legal in street stock class. Thanks for looking. Call Five73 four 80 one 879 to discuss. I have a car hauler if needed. Slab mockup shown. Body has never been used,!!