Jeep Cj jeep cj 7 cars for sale

Jeep : CJ Jeep CJ-7 1986 cj 7 excellent condition only 86 000 original miles plus many extras

$10,000

Alamogordo, New Mexico

For sale is an extremely clean 1986 Jeep CJ7 with only 86,000 original miles. It has a brand new 150 Cubic Inch Four Cylinder Crate Engine with less than 500 miles on it. All the radiator hoses, heater hoses, fuel lines, and fuel filters are brand new including all the hose clamps. It has a brand new radiator with new clutch fan as well. I also installed a brand new OPTIMA RED TOP BATTERY, and a new Kat back bolt on exhaust system. It has a T-4 four speed manual transmission, with a Model 300 Transfer Case with 4H-2H-N-4L. The frame, skid plates, shock mounts, drive shafts, and differentials, along with all other components were stripped and cleaned then painted super gloss black. I installed all new suspension bushings as well as a brand new skyjacker 4 inch suspension lift kit, with new nitro shocks. I then replaced the stock spring shackles with a set of Warrior Products Extreme duty 1.5 inch lift Shackles. Both differentials were serviced, and the axle and hub bearings were also cleaned, re-packed, and re-sealed, then re-installed. I then installed a set of new Superwinch Premium Locking Hubs, and a new steering stabilizer. The undercarriage of the tub along with the inside of the front fenders were stripped, cleaned, then undercoated. I then installed five new Black Cragar 16X8” D window Wheels with matching black premium lug nuts. It has five matching BFG Mud Terrain 255-85-R16 (34” tall tires) that are in excellent condition. The interior was completely taken out, and the tub was sanded down, cleaned, painted, and bed lined around the top end of the tub, then I installed a new heavy duty custom fit vinyl floor in the Jeep. The seat brackets were all sandblasted and painted super gloss black, then brand new Smittybilt front bucket seats and a new rear Smittybilt bench seat was installed with all new hardware. The Jeep has brand new seat belts front and rear, as well as new front and rear Quadratec ultimate floor liners and cargo liner. The Shifter knobs, and shifter boots for the manual transmission and transfer case are all new. The dash was taken completely apart sandblasted and painted semi-gloss black, and all the dash lamps, gauges, and climate control cables were replaced with new ones other than the speedometer gauge, voltmeter gauge, and oil pressure gauge. I installed a new Pyle radio with Bluetooth technology that fits into the stock location without any cutting or drilling. I then installed a new stock speaker, and a new clove box with all new hardware. The dash is unmolested and in perfect condition as is the rest of the interior. It looks brand new! The heater box was taken completely apart cleaned and re-installed with a new heater core, heater duct hoses, and wind shield defrost vents. The sun visors and hardware, along with the roll bar pad cover are all brand new as well. It also has a new Jeep steering wheel with a Jeep horn logo. The driver and passenger side mirrors as well as the rear view mirror are all brand new as well. The front grill of the jeep was sanded down, primed, and painted flat black. New black windshield hinges, KC Light windshield bracket mounts, hood, and door accessories were all ordered in black to match as well. I also installed a new front bumper. I have a binder full of receipts for parts and work I had completed that will be included. I also have a new soft top, and bikini top with an extra set of soft doors that will be included. This Jeep is in immaculate condition for its age, and is super clean! I would not hesitate to drive this Jeep across country anywhere, it is very mechanically sound, and runs great! The 4x4 works as it should and there is no rust on the Jeep anywhere, it does have a few small dings and rock chips here and there that are expected for a vehicle of its age but nothing serious at all. The rock chips in the pictures on the front of the fenders, and the front edge of the hood are from the Jeep being towed behind an RV on a (trailer) by the original owners, it was (never flat towed) and miles on the Jeep are accurate and recorded on the title as actual mileage. The only thing that needs to be replaced is the voltmeter gauge and oil pressure gauge. They have not worked since I purchased the jeep. The jeep does have a new alternator, and has excellent oil pressure, I just forgot the gauges were not working when I reinstalled them. The two gauges are around $10.00 apiece through Quadratec. Other than the volt meter gauge and the oil pressure gauge everything else is in perfect working order as described above. You will not be disappointed with this Jeep! They are getting extremely hard to find in this condition, and it would not take much to turn this one into a show Jeep, especially since all the hard work is finished! Clean and Clear Title in hand! I also have a few other parts that are included as a package deal, I have a complete front (Dana 30) and rear (Dana 20) differentials for this Jeep that I bought as spares, along with a newer Chevy 350 crate engine that’s complete with everything including an Edelbrock 4 barrel intake, It just needs a carburetor. I also have connected to the Chevy 350 a Compound 4 speed manual transmission, and a NP 205 transfer case. This kit includes everything to install a Chevy 350 in the CJ7 with brand new, still in the box Headman ceramic coated fender well headers, and a brand new header back bolt on exhaust. It also includes the longer, and shorter drive shafts, and the easy plug and play wiring harness. The kit just needs the $99.00 motor mount adapters that can be purchased through Quadratec. I am open to making a special package deal for the Jeep and all these extras parts if interested. Or will sell the Jeep by itself, I am open to offers! If you have any questions or would like to come by and take it for a drive please feel free to e-mail me or give me a call at: (575) 491-9283 Thanks,Ken

Trim Jeep CJ 7