Ford Mustang cars for sale in Idaho

1-15 of 22

Sort By

2004 Ford Mustang cobra Rare 2004  Ford Mustang Mystic Chrome SVT Cobra

2004 Ford Mustang cobra Rare 2004 Ford Mustang Mystic Chrome SVT Cobra

$27,995

Meridian, Idaho

Year 2004

Make Ford

Model Mustang

Category Convertible

Mileage 51000

Posted Over 1 Month

Rare 2004 Mystic Chrome SVT Cobra for sale. Nicknamed "The Terminator", it was the last Cobra made in the Dearborn, MI plant. $30,000 - Cash or certified funds only. Title in hand. I am the original owner and not a dealer, so I am not able to finance. This car is a limited edition numbered vehicle (number 167 of 495) that is completely stock and unmodified. To see, call 2088882498, which is a land-line and cannot accept text messages. Certificate is included in sale along with owners manual, 2 sets of keys, all service paperwork and warranty information. This car is loaded with premium color changing leather, racing pedals, 6 speed manual transmission that controls a 4.6 liter V8, supercharged at the factory, engine rated at 410 hp and 390 lb ft of torque, fog lights, power cloth (not vinyl) roof with boot, 17" low profile chrome wheels, premium sound system, airbags, traction control, SVT signed engine plate, security system, and much more. Serious inquiries only. Please don't waste my time if you do not have the money to purchase this car.

Trim cobra

1971 Ford Mustang Grande 1971 Ford Mustang Grande

1971 Ford Mustang Grande 1971 Ford Mustang Grande

$10,000

Boise, Idaho

Year 1971

Make Ford

Model Mustang

Category Convertible

Mileage 80000

Posted Over 1 Month

For sale is my 1971 Ford Mustang Grande. This car is a 2 door hardtop with the 351 Cleveland engine and a 2V carb. The body is in good condition with minimal rust. I am uncertain of the exact mileage as the previous owner replaced the guages with dakota digital but it is estimated to have around 80,000 total miles. This car has new front rotors/pads and a new dash. I drive it about once a week on average and have never had problems that require work other than basic maintenance. The paint has a few scratches that can be touched-up easily. I have a clean title in hand (it is a Nebraska title as I have recently moved to Boise). Cons: -In need of new front sway bar end links (this causes a rattling sound when going over bumps). -The rear left shock tower will need to be welded at some point. (I still have the shock, this does not affect how the vehicle drives much - I got an estimate for around $100 to be done professionally).

Trim Grande

Ford : Mustang Shelby GT500 2007 shelby gt 500 mustang like new very low miles

Ford : Mustang Shelby GT500 2007 shelby gt 500 mustang like new very low miles

$34,000

Boise, Idaho

Year 2007

Make Ford

Model Mustang

Category Convertible

Mileage 4920

Posted Over 1 Month

Like New 2007 Shelby GT500 1 of only 21 Tungsten Gray Shelbys with stripe delete paint option. (one of 384 Tungsten Gray 2007 GT500s) Very low miles - less than 5,000. Clean car with clear title. Always covered and garaged in climate controlled building. Only hand washed. Only driven on dry pavement. Never used on a track. Still have original protective covers on door entry panels. Started once a month. Black on Black leather. Premium Trim Package. Shaker 1000 Audio system. Brembo Brakes 18" Bright Machined Aluminum Wheels. K&M Air Intake. Muffler Delete. Tuned to over 500HP. Includes cover, original muffler and air intake. I always use pure synthetic Amsoil/premium fuel Clean Title Feel free to call Pete@ 208-315-2287 with any questions

Trim Shelby Premium Trim Package

Ford : Mustang 2003 ford mustang

Ford : Mustang 2003 ford mustang

$1,878

Twin Falls, Idaho

Year 2003

Make Ford

Model Mustang

Category Convertible

Mileage 135000

Posted Over 1 Month

Vehicle was t-boned on the right side. Passenger airbags deployed. Car is totally driveable. Nothing wrong with engine, transmission, or tires and wheeles. Interior is in good shape, except for the airbags.

Ford : Mustang GT PREMIUM 2012 ford mustang gt premium 5.0 l 6 speed

Ford : Mustang GT PREMIUM 2012 ford mustang gt premium 5.0 l 6 speed

$21,990

Hayden, Idaho

Year 2012

Make Ford

Model Mustang

Category Convertible

Mileage 43120

Posted Over 1 Month

VERY CLEAN GT PREMIUM, VERY FUN CAR! RUNS AND DRIVES AWESOME! SHAKER SOUND SYSTEM, LEATHER, HEATED SEATS, GT TRACK PKG WHICH INCLUDES, BREMBO BRAKE PKG, 3:73 REAR END, STRUT TOWER BRACE, AND 19 INCH ALLOY WHEELS WITH Z RATED TIRES. CLEAN TITLE, NO ACCIDENTS OR DAMAGE EVER. WELL TAKEN CARE OF. EMAIL WITH QUESTIONS, CAN TAKE MORE PICS IF NEEDED.

Trim GT PREMIUM

Ford : Mustang Bullitt 2008 mustang gt bullitt

Ford : Mustang Bullitt 2008 mustang gt bullitt

$11,500

Mountain Home, Idaho

Year 2008

Make Ford

Model Mustang

Category Convertible

Mileage 141000

Posted Over 1 Month

HID HeadlampsShaker 500Ambient lightingSequential Tail light MODAfter market Pypes tail pipesVery nice interior with Shelby GT500 leather seats. Car runs great and I've had no problems with it while I've owned it. There are some scratches on the rear bumper and a couple of touch ups on the hood. Make an offer but don't waste our time.

Trim Bullitt

Ford : Mustang SVT Cobra Coupe 2-Door 1999 ford mustang svt cobra coupe 2 door 4.6 l

Ford : Mustang SVT Cobra Coupe 2-Door 1999 ford mustang svt cobra coupe 2 door 4.6 l

$6,500

Caldwell, Idaho

Year 1999

Make Ford

Model Mustang

Category Convertible

Mileage 107969

Posted Over 1 Month

As far as performance, the Mustang Cobra speaks for itself. I bought the car in Arizona in late 2010 and it had 99,282 miles at that time, so as you can see I haven't driven it much. I am selling the car due to my health issues. I put new tires (245/45 ZR-17 99W Proxes all-season) on it at the time of purchase; they are 50,000 mile tires. I have put about 8,600 miles on them, which makes a good deal for you. Interior is nearly perfect; dark charcoal leather. The engine sounds very good; I can hear nothing at all wrong with it. The only alteration has been a cold air intake with a covered KN filter. I can honestly say I have never fully accelerated the car, although I've pushed it a little from time to time just to hear the pipes. They are not loud, like some, but begin to speak with some authority around 2,000 RPM. The car is equipped with Roush body kit and side exhaust. It's been a great car, and is a real eye catcher. Just had the front repainted due to some rock chipping, etc. There are some minor things to be done. The cowl cover has a small crack at the right side wiper; minor rock chipping at right side exhaust and weathered headlight lenses. Minor paint fading at rear bumper, top edge. I believe if these were taken care of, with some additional detailing, i.e., engine bay dressing, wheel polish, brake calipers and hubs repainted, that the car will be ready for show. Let me know if you have questions. I've enjoyed the car, and I know the next owner will. Thanks for looking! NOTE All recalls have been completed. NOTE: The successful bidder will also get the beautiful 40th Anniversary Mustang Jacket, Size X-Large, as shown in the pictures. Jacket will not be sold separately.

Trim SVT Cobra Coupe 2 Door

2014 Ford Mustang GT Boise, ID

2014 Ford Mustang GT Boise, ID

$22,971

Boise, Idaho

Year 2014

Make Ford

Model Mustang

Category Convertible

Mileage -

Posted Over 1 Month

Cylinders: 8, Doors: 2

Ford : Mustang GTA Convertible 1967 mustang gta convertible 300 hp matching 289

Ford : Mustang GTA Convertible 1967 mustang gta convertible 300 hp matching 289

$49,000

Boise, Idaho

Year 1967

Make Ford

Model Mustang

Category Convertible

Mileage 400

Posted Over 1 Month

Up for auction is a high quality restoration and upgraded 1967 Mustang Convertible. This car was born a standard convertible and has been completely and accurately restored to a Grade 2 GTA Convertible with higher quality updates to the engine and rear end. Modifications and work are shown below and also includes the addition of a Shelby rear deck and tail light configuration. The entire car was redone except for the inside trunk. Work was done between 2012 & 2014. This is a San Jose built car, always in CA until I bought it. No rust. No accidents. No body fillings. Shipping is the responsibility of buyer but I will help in any way that I can. Car is available in other venues (local and otherwise) and I reserve the right to close this auction should the car sell in a non-eBay related transaction. A $1,000 down payment is due within 24 hours of winning bid. Full payment is due within 7 days of auction close. Body: Car had been painted with Base Coat Clear Coat when I purchased the car but has been wet sanded and polished since.A complete new GT grill and grill bars, center horse, fog lights and wiring and hardware. Tail lights were removed and glass beaded, cleaned and repainted with the reflective paint. The wiring was cleaned for good connections as well as all ground wires. Rear taillight bezels were cleaned and repainted and new lenses were installed.Window regulators were removed, cleaned and greased. The rollers were replaced where needed, they were reinstalled along with complete new vent window assemblies which included new frames, glass and working hardware. New inner and outer window felts.New outside door mirrors were installed on both sides using show quality mirrors, including driver side remote unit.All stainless steel outside trim was removed including windshield trim and wiper arms and convertible top trim dents were removed and then polished to a high show quality luster and reinstalled.New snaps were installed on the rear trim for the new convertible top boot.A new antenna was also installed.New white-wall tires were installed.One small (1/8 inch) chip in paint on hood Interior: The interior was completely removed down to the body, cleaned and prepped.Doors were stripped of paint, cleaned, primed and painted a semi-stain black enamel.The dashboard was cleaned, sanded and a light coat of primer was added and then the dash was painted the same.The glove box door and ashtray were glass beaded, primed and painted. Rear interior panels were stripped of the old vinyl and all of the old glue was removed and cleaned before applying a new vinyl covering. New snaps were installed where needed.The floor was cleaned and new black carpet was installed.The seat belts were re-wedded and buckles were glass beaded, cleaned and repainted.A correct 67 tilt-away steering column was also installed but the tilt-away feature was eliminated. Tilt feature still works.A N.O.S. turn signal switch was installed.New deluxe seat upholstery, as well as new seat buns were installed on the front bucket seats and rear seat.A new dash pad was installed.A new instrument panel, A/C center section, glove box area, heater controls on the driver’s side and A/C vent on the passenger side were replaced with new deluxe aluminum panels using new chrome bezels. True aluminum overlays were used, not the cheaper vinyl stick-on type.All gauges were cleaned and needles were repainted with correct reflective orange paint.The glove box door trim was removed and polished. The glove box was cleaned and dyed with vinyl dye and reinstalled.Window visors were cleaned and dyed with the visor hardware cleaned and polished.A new deluxe 1967 floor console and shift handle was installed along with a new custom Autosound USA-1 AM/FM radio was 200-watt output was installed. A new 4 X 9 two way speaker was installed in the dash, while (2) custom made 6 X 9 base ported box speakers were installed in the rear. The 6 X 9 speakers are covered in correct vinyl and are removable to be able to put them in the trunk for safe keeping when needed. New deluxe door panels were installed.All stainless steel panel trim was polished and installed with the door panels.New window cranks and door handles were installed.New correct 1967 Mustang floor mats were installed. Suspension, Steering & Brakes: New front and rear springs, insulators and bushings were installed.New rotors and loaded calipers were installed on the front wheels and new rear drums and shoes were put on the rear wheels. All drums and rotors were turned to insure that they were true.The proportioning valve was cleaned and new seals were installed.New front and rear brake hoses and rear lines were installed.New upper and lower control arms, coil spring mounting seats and bushings were installed on the front wheels. New steering components, including new ball joints and bushings, new inner and outer tie rods were installed on both sides.New strut rods and bushings and eccentric adjusters were installed.New sway bar bushings and end links were installed.New power steering control valve and power ram and hardware were installed, as well as all power steering hoses.The power steering pump was replaced with a rebuilt unit and detailed.New shocks were installed on all four corners.The steering box was disassembled, cleaned, and new seals, bearings and bushings replaced. All were filled with new grease and adjusted.All new components were aligned and all fittings were greased as well as all new fluids were added. Engine Block: A correct 1967 289 standard bore block was used in the build of this engine. It was hot tanked twice and was bored 30 over with new seal power 8.75:1 pistons, rings and rods and cam bearings.New Scat connecting rods were used. New Comp cams, medium range cam, lifters and Manley push rods, brass freeze plugs were used.A new oil pump, timing chain and gear, harmonic balancer, water pump was installed.The stock crank was turned 10 under and entire rotating assemble was balanced.Fel-Pro gaskets were used throughout.All engine block areas were painted in correct 1967 Ford dark blue paint. Heads: 1969 302 four-barrel heads were hot tanked and milled to flat. They were ported and polished for better flow and match ported to the intake and exhaust. New valve guides received a 3 angel grindNew Manley intake and exhaust valves were installed.New Comp cam springs and an all new keeper were installed.New heat treated roller tip rockers, nuts and balls were installed.Cobra high rise intake and open letter Cobra valve covers were restored and highlights were polished and installed. Other Engine Detail: A new Holley 600 CFM street performance carburetor with vacuum secondary’s and power valve blowout protection, electric choke and HP air cleaner were installed.The alternator and starter are rebuilt units and both were fully detailed.A new yellow top coil was used;All sheet metal was glass beaded and painted.The original oil pan was cleaned and all dents removed. The pan was painted at the same time as all other engine parts.An original rebuilt Ford Hi-Po 289 duel point distributor was used and has the correct application Pretronix Igniter solid state ignition installed instead of the old style points.An original set of Hi-Po exhaust manifolds were glass beaded, cleaned and coated with Por-15 manifold dressing then baked at 350 degrees for 20 minutes. They were then installed using new grad 8 bolts with lock washers.The engine was broken in using Comp Cams break in oil for flat tappet engines. Break in fuel was 110 octane racing fuel for consistency.The overall compression ratio with decking of 5/1000th’s on the block and 5/1000th’s on the heads. Ratio should be about 9:1. Horse power rating should be about 270 – 300 HP on Premium grade fuel, which is recommended for this engine. Transmission: Transmission is a correct 1967 Ford C-4 automatic transmission that was disassembled, cleaned and pressure washed in a transmission pressure washer.New transmission parts include master rebuild kit, front and rear bands, sprag reverse servo piston, bushing kit, planetary gear, modulator and Stage II B&M shift kit. It also includes a rebuilt 1,500 – 1,800 stall torque converter and new automatic fly wheel.The drive shaft is a correct Ford unit with new U-joints and new front yoke, all detailed and balanced. Rear Differential: New 355 ratio posi-track Auburn ring and pinion gears, new side bearings, front inner and outer bearings.New axle seals with center run pattern that is topped off with fresh Redline 80/90 gear lube. Air Conditioning & Components: New aluminum York-style compressor with new Roto-Loc service valves and original 1967 aluminum caps, compressor brushes and N.O.S. idler pulley.A new correct year condenser, receive dryer, expansion valve, heater control valve and vacuum control switch were installed.All parts were detailed with brackets, clamps and seals.Original used and cleaned A/C lines were installed.A/C system was not charged. Prior to this the system was set up using R134 fluid.All seals were replaced and are adaptable to either fluid system. Note: the system should be flushed and checked for leaks before it is charge with either R-12 or R-134 fluid. Engine Compartment: All interior areas were cleaned, with some areas fully stripped. All surfaces were sanded, dents repaired and holes were welded and filled.All interior surfaces were primed and painted with black semi-stain black enamel paint.The brake booster was removed, cleaned, sanded and repainted, as was the new Master Cylinder.New wiring includes the engine gauge feed harness, air conditioning harness, alternator harness, battery cables, correct spark plug wires, forward light harness, fog light harness, oil pressure switch, temp switch, regulator, starter relay and convertible top relay.A Shelby Export Brace was added to help with stiffening up the front end for better handling.The radiator was completely refurbished and rebuilt, i.e. fully rodded out. On Oct-02-15 at 12:35:51 PDT, seller added the following information: Vehicle VIN # is : 7R03C167979 On Oct-05-15 at 11:41:18 PDT, seller added the following information: Restoration work done between 2012 - 2014. Over $32,000 has been invested into the restoration. Very rare GTA Convertible in this year. Please read all of the build list to fully appreciate the quality and accuracy of this restoration.

Trim GTA Convertible

2015 Ford Mustang GT Boise, ID

2015 Ford Mustang GT Boise, ID

$32,995

Boise, Idaho

Year 2015

Make Ford

Model Mustang

Category Convertible

Mileage -

Posted Over 1 Month

Exterior Color: black

Ford : Mustang 1969 mustang grande

Ford : Mustang 1969 mustang grande

$8,000

Boise, Idaho

Year 1969

Make Ford

Model Mustang

Category Convertible

Mileage 127000

Posted Over 1 Month

Originally my wife’s high school ride, then my weekend errands car while my son was in high school (and using the family van). Now, it mostly sits in the garage, waiting for somebody who is a classic Mustang enthusiast to come along and want it. It doesn’t get driven much. Probably a Condition 4 based on the Hagerty Price Guide, but it has the larger 351 cubic inch engine instead of the 302 listed in the guide.

2014 Ford Mustang Rexburg, ID

2014 Ford Mustang Rexburg, ID

$29,999

Rexburg, Idaho

Year 2014

Make Ford

Model Mustang

Category Convertible

Mileage -

Posted Over 1 Month

Exterior Color: blue metallic, Cylinders: 8, Doors: 2

Ford : Mustang 68 mustang coupe 99 restored with new paint

Ford : Mustang 68 mustang coupe 99 restored with new paint

$13,500

Boise, Idaho

Year 1968

Make Ford

Model Mustang

Category Convertible

Mileage 67000

Posted Over 1 Month

New paint, carpet, headliner, upholstery, radiator, brakes, clutch, to name a few, frame reinforced, good compression, starts and runs strong, not a full restore but a great daily driver. Call 208-570-2011 for questions. Can Ship for additional shipping fees.

Ford : Mustang 1964 1 2 custom grey black mustang

Ford : Mustang 1964 1 2 custom grey black mustang

$12,000

Dalton Gardens, Idaho

Year 1964

Make Ford

Model Mustang

Category Convertible

Mileage -

Posted Over 1 Month

For sale is my 1964 1/2 Mustang that has been my project for the past year. This thing is a sweet car. Custom grey metallic paint with black ghost stripes up the middle. Converted to a C4 automatic transmission. Rebuilt Ford 302 Motor. has brand new black interior. Completely new exhaust. new electric fuel pump. Custom fog light GT kit. Completely new wiring Harness!!! that is a huge deal for these old cars. All electronics work awesome. The car is road-worthy right now. I have tons of mustang parts that I will include with this car. this car doesn't need them, but its always nice to have extra parts. This car is really nice, it has a few things that still need to be done to it that keep it from being a 20,000$ car. It needs to be detail cleaned, the glove box liner needs to be installed (I have this part). the driver side door handle needs installed, I have been waiting on the new mechanism forever, which I need to put the door panel back on. Just some really small things that anybody with common sense could do. You do not have to be a mechanic. Let me know if you have any questions and i will do my best to answer them for you.

Ford : Mustang GT Convertible 2-Door 05 ford mustang gt

Ford : Mustang GT Convertible 2-Door 05 ford mustang gt

$22,000

Hailey, Idaho

Year 2005

Make Ford

Model Mustang

Category Convertible

Mileage 31045

Posted Over 1 Month

this mustang has the after market "steeda" package producing plenty of power, a roll bar, shelby hood pins and brand new custom chrome "foose" wheels! with 285/40's in the rear and 255/45's in the front. the new buyer will will be required to wire the money directly to my account and be responsible for picking the vehicle and the title up in person. or i can mail the title once the funds are wired.

Trim GT Convertible 2 Door