Dodge Ram 1500 srt10 viper cars for sale

1-2 of 2

Sort By

Dodge : Ram 1500 SRT 10 VIPER Quad cab 1500 Ram SRT 10 VIPER TRUCK Edition 212 ext  color Yellow

Dodge : Ram 1500 SRT 10 VIPER Quad cab 1500 Ram SRT 10 VIPER TRUCK Edition 212 ext color Yellow

$35,000

Ossining, New York

Year 2005

Make Dodge

Model Ram 1500

Category Pickup Truck

Mileage 32000

Posted Over 1 Month

1500 Dodge Ram SRT 10 VIPER TRUCK

Trim SRT10 Viper

Dodge : Ram 1500 2 Door SRT 10 2006 dodge ram srt 10 v 10 viper engine 8 000 miles so clean its new

Dodge : Ram 1500 2 Door SRT 10 2006 dodge ram srt 10 v 10 viper engine 8 000 miles so clean its new

$33,000

Schaumburg, Illinois

Year 2006

Make Dodge

Model Ram 1500

Category Pickup Truck

Mileage 8000

Posted Over 1 Month

One of 87 of only 872 last editions 2006 Dodge SRT-10 Ram Viper trucks. 2nd owner show truck, so clean and its sick. The 2006 Is the very very desirable one. Body change in 06 make new interior and front end for final year. 04, 05 are different interor and front end. This is why you never ever see 2006's for sale.Very, very clean unscratched, completely stock SRT. Only 8,000 miles and so clean its sick. The Dodge Ram SRT-10 is a sport pickup truck that was produced by American automaker Dodge in limited numbers. It was introduced at the January 2002 North American International Auto Show, but was not put into production until 2004. Unlike previous Ram trucks, the SRT-10 was built solely for the purpose of speed. The 2004 Dodge Ram SRT-10 is a high performance pickup truck with the biggest engine ever installed in a production passenger pickup truck in the USA. The Dodge Ram SRT-10 features muscular looks, stylish body structure, one of the largest engine, tires, wheels and brakes. The Dodge Ram SRT-10 features an aluminum 8.3 L Viper V-10 with a capacity of 8277 cc. The engine features an increased size in the bore and stroke; it also consists of cylinder heads with combustion chamber cooling and exhaust port. The engine contains a Heavy Duty Cooling System for the cooling of the engine at all times.The engine delivers an output power of 500 bhp at 5600 rpm and 525 lb-ft torque at 4200 rpm. It reaches the speed of 60 mph in 4.9 seconds and the top speed is about 153 mph. The Dodge Ram SRT-10 features T56 six speed manual transmission and the gear shifts can be performed easily at higher speeds. The Dodge Ram SRT-10 features independent suspension and tuned suspensions which makes the truck to drop an inch on the front and two inches on the back, as a result the truck moves smoothly even at high speeds at all conditions. The Dodge Ram SRT-10 features 22-inch aluminum wheels also the largest wheels in the Dodge. These wheels are wrapped with high performance Pirelli tires with shock absorbers, piston calipers and Anti Braking System that ensure a better braking even at high speeds. The exteriors feature the mirrors, muscular looks of the body, SRT-10 badge and door handles. The interiors feature the instrument panels, airbags, start button, leather seats and steering wheel. Configuration: - Front Engine Engine: - 8.3 L Viper V-10 Capacity: - 8277 cc Power: - 500 bhp at 5600 rpm Torque: - 525 lb-ft at 4200 rpm Transmission: - 6-Speed Manual Weight: - 5000 lbs Top Performance: 0-60 Performance: 4.9 seconds Top speed: - 153 mphDevelopment The Dodge Ram SRT was created by DaimlerChrysler's PVO (Performance Vehicle Operations) division, using Dodge Viper and Plymouth Prowler engineers. Extensive wind tunnel testing was used in styling the exterior of the Ram SRT-10. This is the second time that Dodge has put a Viper engine into a Ram pickup. At the 1996 Chicago Auto Show, Dodge introduced a concept Dodge Ram with a Viper Generation 2 engine, but it was not put into production. The Dodge Ram VTS was painted Banzai Blue with dual white skunk stripes, housed a 488 cid V10, a six-speed Borg-Warner manual gearbox, and 17-inch (430 mm) Viper GTS wheels wrapped in BF Goodrich 275/60-HR17 Comp T/A HR4 tires.OverviewDodge Ram SRT-10 engine (with aftermarket intake tube) The SRT-10 featured an 8.3 Liter Viper V10 This engine produced 510 bhp (380 kW; 517 PS) at 5,600 rpm and 525 lb·ft (712 N·m) of torque at 4,200 rpm. The regular cab, with a total curb weight of 5,130 lb (2,330 kg), reached a top speed of 153 mph (246 km/h), and could accelerate from 0 to 60 mph (97 km/h) in 4.9 seconds, whereas the Quad Cab, weighing 5,618 lb (2,548 kg), did 0-60 in 5.6 seconds and reached a top speed of 147 mph (237 km/h). The regular cab could complete the 1/4 mi (400 m) in 12.6 seconds at 110 mph (180 km/h), the Quad Cab in 13.8 seconds at 104 mph (167 km/h). The engine produced one horsepower for every 10.3 lbs of vehicle weight in the regular cab. The regular cab generated .86 g of grip on a 300 ft (91 m) skidpad, while the Quad Cab generated .83 g. The regular cab was rated by the EPA at 9 MPG city/15 highway, while the Quad Cab was rated at 9 city/12 MPG highway.Drivetrain The V10 Viper engine delivered 90 percent of its torque from 1500 to 5600 rpm. The cast aluminum cylinder block had cast-iron liners and cross-bolted main caps. The bore and stroke had been increased over previous Viper models. Compression ratio, firing order, rod length, block height and block length were unchanged from the second-generation Viper engine. The regular cab featured a Tremec T-56 transmission, while the Quad Cab utilized a 48RE four-speed automatic transmission modified from the Ram Heavy Duty transmission. Both regular cab and Quad Cab used a Dana 60 rear axle.Gear123456Final DriveRatio2.66:11.78:11.30:11.00:10.74:10.50:14.10:1 (2004); 4.56:1 (2005–06) 48REGear1234Final DriveRatio2.45:11.45:11:1.000.69:14.56:1Suspension PVO engineers modified the Ram Heavy Duty's rack and pinion steering and independent front suspension for use in the Ram SRT-10. A fully hydroformed Dodge Ram frame was used in conjunction with a custom-tuned suspension, lowering the Ram SRT-10's ride height one inch in the front and 2.5 inches in the rear. Bilstein shock absorbers, performance-tuned springs and unique aerodynamic aids were used to enhance the Ram SRT-10's higher-speed performance. An additional 5th shock was used on the rear axle to prevent wheel hop during wheelspin.Exterior The Ram SRT-10 had a unique hood that featured a wide power bulge and hood scoop. The hood scoop allowed cool air to enter as well as forcing hot air to exit from the engine bay, thus helping the engine to run cooler. "Viper Powered" badges were added to the sides of the power bulge, to indicate the SRT-10 engine under the hood. Another exterior feature was a tonneau cover with an attached spoiler that was supposed to come standard on the 2005 Quad Cab version and all 2006 models, but due to manufacturing problems was not installed on nearly half of the Ram SRT-10s intended. To help remedy this situation, Dodge added a $1000 credit and a regular spoiler to the Ram SRT-10s that did not receive the tonneau cover. In addition to style, the spoiler also helped with air flow and provided a reduction in lift and drag. The Ram SRT-10 had a bed size of 6 ft 3 in (1.91 m), giving the regular cab an overall length of 17 ft 7 in (5.36 m), and 19 ft 2 in (5.84 m) overall length for the Quad Cab. The Ram SRT-10 also had a lower ride height than regular Ram trucks.Interior The stock stereo system of the Dodge Ram SRT-10 consisted of 8 Infinity brand speakers. It also came with a leather trimmed steering wheel and with heavily bolstered racing-derived suede-trimmed charcoal leather seats. The center stack was adorned with silver trim, and a silver trim strip with the SRT-10 logo resided under the passenger-side air bag cover. Taking a cue from the Dodge Viper, the Ram SRT-10 came with a red start button on the dash. The manual transmission regular cab featured a Hurst shift lever, which sprouted from a silver metal shift bezel and was fitted with a Viper shift knob. Aluminum performance-inspired pedals replaced the stock setup. The gauge cluster featured satin silver-faced gauges and Viper font and graphics. The speedometer and tachometer were recalibrated to match the Ram SRT-10's increased performance.Colors Excluding the special editions, the 2004-2005 Ram SRT-10 came in three colors: Brilliant Black Crystal Pearl Coat, Bright Silver Metallic Clear Coat, and Flame Red Clear Coat. The redesigned 2006 Ram SRT-10 came in Mineral Gray Metallic, Inferno Red, and Brilliant Black Crystal Clear Coat.Wheels and brakes The stock 22-inch (560 mm) wheels were fitted with Pirelli Scorpion P305/40R-22 performance tires and modeled after the 10-spoke wheels available on the Viper. The brakes for the 2004 model (front and rear) and 2005-06 (rear) were modified from the Ram Heavy Duty truck for use in the Ram SRT-10. The standard ABS-equipped brakes were fitted with 15-inch (380 mm) rotors in front and 14-inch (360 mm) rotors out back. 2004 models used red-painted two-piston sliding brake calipers front and rear; these were replaced with larger four-piston monoblock calipers up front in 2005-06, designed by TRW and unique to the SRT-10. Two Nascar-inspired brake cooling ducts integrated into the front fascia provide cooling for the Ram SRT-10's brakes.

Trim SRT10 Viper